Correct operation steps and methods of Rice Huller(LIANGGONG) machine equipment
1. First put the rice huller complete equipment on the task table and plug in the power plug.
2. Determine the whitening time and adjust the timing knob.
3. Take out the pressure in the hopper, take 17-20g of brown rice (the moisture content does not exceed 15%), put it into the feeding hopper, and let it flow into the whitening room. Press the power button to start, then lower the pressure.
4. To the regular time, the complete set of rice huller equipment will be actively stopped, first remove the hopper, clear the mink. Then insert the hopper, then take out the pressure, turn the back into the handle and turn to the right, so that the milled rice room falls into the hopper, turn the timing knob to 0, press the power button to make the wheel idling for a few seconds, so that In the whitening room, all the rice grains are lost, and then the rice is pulled out, and the polished rice is obtained after the sifting.
Click Rice Grader to learn about more information.
